Idraulico reso semplice – Suggerimenti per aiutarti nei tuoi progetti idraulici


Translating…

Frozen and bursting pipes from harsh winter weather is a problem that no-one wants, so plan now to winterize your exterior faucets and pipes against freezing conditions. A simple way to accomplish this is to find the exterior water shut-off valve located inside your home (often located in the basement). Turn off the water valve to stop water flow, and then open up the outside faucets to drain out any water that has collected. Be sure to turn off the outside water faucets tightly after the water has drained out. Take in any hoses you may have outside so they don’t crack from the cold weather.

If you live in an area that sees routine freezing temperatures, make sure you do something to keep your pipes from becoming frozen as well. There are a wide variety of ways you can keep your pipes from freezing, which will help you avoid damage to your home and costly repairs.

It’s important to know how to turn off the water in your home in case the worst happens. For example, if your bathroom sink started leaking, do you know how to stop it? Walk around your home and find all the shut-off valves for each set of pipes and write them down. Create a map so you can always have a reference if necessary.

Believe it or not, it is not a very good idea to use a plunger if your toilet is clogged. Plungers just push whatever is stuck deeper into the drain. Instead, it is a better idea to use a closet auger. It will do a better job and is affordable.

If your drain in any device is taking longer to drain water, then you may need to have your pipes professionally cleaned depending on the severity of the circumstances. Before you do this, there are several different products you can try. However, some of them are professional strength and all products should be used with caution.

Watch out for decreased levels of intensity in the water flow in your bathroom. This can be a sign of calcium or mineral deposits disrupting water flow. If spotted early enough it may be possible to remedy this without having to replace the pipes.

If you experience weak or irregular water pressure from your showerhead, there may be mineral build-up preventing clear water flow. A simple solution to this problem is to clean the outlet holes in the showerhead with a pin. If the showerhead consists of a perforated face plate, take the showerhead apart and soak the faceplate in a vinegar solution overnight before reassembling.

If the hot water heater in your house is over ten years old, you should look at replacing it. Hot water heaters are very susceptible to corrosion on the bottom. This can lead to leaking and flooding whatever room it is in. Then not only will you have to replace it, but you’ll have to fix any damage caused by the leak.

If a pipe ever freezes, you need to make sure to shut off the water. This will keep the pipe from bursting and causing you major damage to your home. Make sure to shut the water off at the main valve, and then open the faucet that is closest to the frozen pipe so it can drain while it is thawing out.

Plumbing Prices

Ask before the plumber comes out if they charge for the consultation. In order to quote a project, the plumber has to come out to inspect your particular issue. It is standard to charge for the consultation appointment but the prices can vary wildly. Ask upfront so that you aren’t surprised by the total.

Call different plumbers before choosing one. Plumbing prices among professionals are not uniform. Before you hire someone to fix a major problem, call two or three other plumbers to see what their prices are like. This can be difficult if you have a major plumbing problem that you need solved right away, but will save you money in the end.