Translating…
There are many benefits to fixing a leaky bathtub faucet. Other than eradicating the annoying dripping sound that wakes the dead at 3:00 am, there is substantial cost savings that can be realized on the monthly water bill by completing this simple fix. In addition, a leaky faucet causes stains on the bathtub surface which lead to the need to replace the entire bathtub unit. Although plumbing, in and of itself, is a complicated art, fixing a leaky bathtub faucet is relatively simple for the everyday do-it-yourselfer.
Several steps must be examined prior to determining which route to take when preparing to fix a dripping bathtub faucet. First, the leaky faucet must be disassembled in order to determine the cause of the leak. In order to fix a leaky tub faucet, the rubber washers, seals and gaskets must all be thoroughly inspected to determine if there is wear or damage on any of the parts. Make sure to keep the parts lined up on a paper towel or other non-slip surface so that parts that are vital to the project do not fall behind small spaces or onto the floor, causing further damage. Once the damaged part is located, it is only a matter of determining the most cost-effective method of repair. Consideration should be given to expense, time-expense, and the do-it-yourselfer’s capability.
Even the best do-it-yourselfer runs into a problem that they cannot solve, regardless of expertise. Be this as it may, it is important to know the indications for when a do-it-yourselfer should attempt to repair a leaky tub faucet, replace the dripping bathtub faucet with a new one from the hardware store, or at what point calling in a plumber might be cheaper than going it alone. Several criteria must be considered before making this determination, including the cost of the overall project, the time investment in relation to how much the do-it-yourselfer’s time is worth, and when the project requires an absolute expert fix.
In order to fix a leaky tub facet, several questions must be answered. Determine the total estimated cost of the parts that will be needed to replace the non-functioning parts. Does this figure include any specialty tools that must be purchased in order to complete the task at hand? How does this figure compare to fixing a leaky tub faucet by replacing it with a brand new faucet when considering both time and cost? Consider using the do-it-yourselfer’s hourly wage and adding the total number of hours multiplied by the hourly wage to the total anticipated cost for the needed replacement parts. At this point, is it cheaper to just call in a plumber? If so, do it, unless gaining the knowledge of how to fix a leaky tub faucet is the do-it-yourselfer’s primary objective. If the total time and monetary cost of replacing the small parts is less than replacing the entire leaky faucet unit, then replace the small parts.
Now that the difficult part, the cost benefit decision-making, is complete, a trip to the hardware store is necessary. Make sure to make a list of all tools and parts that will be needed to complete this project and bring the damaged part (s) along for the ride so that they can be used as a comparison to new parts. After purchasing the needed parts, install the new parts making sure to put each piece of the faucet back in the order from which it was removed. Tighten all parts down as the fix is occurring. Turn on the water. There should be no more leaks. If there is still a leak, take the leaky faucet apart and re-tighten each part, and if it still does not work, call a plumber. Generally, it is simple to fix a dripping bathtub faucet, but if the task at hand becomes too overwhelming, remember that there are professionals standing by with a hands-free solution to fix the leaky bathtub faucet.